Shizuishan, Wuzhong where to sell the paint film gloss photometer DR60A type Glossmeter Help First, the reference standard and scope DR60A type gloss meter is in compliance with ISO-2813, GB9754, GB9966, GB / T13891 national standards, design and production precision, miniaturization gloss meter, suitable for coatings, paints, inks, plastics, stone, flooring, ceramics, paper, wood furniture surface specular gloss measurements. Second, the instrument technical indicators instrument indicators in line with national metrological verification JJG 696 a gloss meter standards. 1, measuring range: 0.0-199.9 gloss units (Gs) 2, showing error: <1.2 gloss units (Gs) 3, stability: 0.4 (Gs) / 30 minutes and 4 and the measurement window size: 14 × 28mm 5, instrument Dimensions: 110 × 38 × 70 (mm) 6, Power supply: two AAA batteries 7. Environment: Temperature: 0 ° C ~ 40 ° C; relative humidity: not more than 85% 8. Instrument Weight: 300g III. equipment use: equipment for the intelligent automatic continuous testing, simply press the power button "ON / OFF", when used, the instrument on the measured surface, the instrument automatically measured gloss values ??and where on the display display. Procedure: Press the power button "ON / OFF", after boot, the gloss meter flat on the random distribution of the standard board, (standard board should wipe clean), press the CAL key to calibrate; then the instrument on Testing on the measured object can be. Fourth, the instrument calibration in the boot state put the instrument on a standard measurement (To ensure accuracy, please keep the calibration standard plate clean) board, when the measured value and the difference is greater than the numerical standard board 1.2GS (GU), the instrument on the standard panel, press "CAL" button calibration. The instrument will beep a sound, successful calibration. Note: Just press calibration "CAL" button for one second, do not grow V. Note: This instrument uses two AAA alkaline batteries, open the battery cover, the battery according to positive and negative signs (see battery compartment ) installed, please do not hold against. If there is a low voltage indication, replace the battery. Over time, unused, remove the batteries to avoid leakage. Body:? This instrument belongs optical precision instruments, should avoid violent impact. And try to put in a dry, clean environment to use; when not in use, place the detection window facing down, so that the measuring chamber hidden dirt; measurement is completed, be sure to turn off the power, the instrument is placed into the instrument box cleaner place to prepare for the next measurement. Accessories:? When the standard plate tarnished, please use lens cleaning cloth. u measurement techniques:? From a cooler place to a warmer place (such as winter outdoor to indoor), please wait a moment during the measurement. (Due to low temperature optical lens from place to place high temperature surface of the lens will be fogging)? Do not be measured in the tested products under direct sunlight environment, so that the measuring values ??are affected. Instrument configuration list: host, a standard board piece, two AAA batteries, a cleaning cloth, a manual, a certificate, an instrument case. Instrument year warranty (excluding damage caused by the use of non-normal), and lifetime maintenance. If you have questions, please contact the manufacturer or distributor.